How to store and maintain a shuttle loom

2023-11-13 21:36:58

Shuttle loom is a kind of mechanical equipment used for weaving, its operation requires some specific conditions and maintenance, so as to ensure its normal operation and extend its service life. This article explains how to store and maintain the shuttle loom and provides some practical tips and advice.

First, the storage of shuttle loom

1. Cleaning: Before storing, do a thorough cleaning. Remove dust and debris from the shuttle loom with a cleaning cloth or vacuum cleaner. Special attention is paid to cleaning the shuttles, shuttle rods and the individual parts inside the shuttle loom.

2. Lubrication: In order to avoid rust and wear of mechanical parts, the moving parts of the shuttle loom can be lubricated with an appropriate amount of lubricating oil. Before applying lubricating oil, wipe away old grease and dust.

3. Storage location: Choose a dry, ventilated storage location to avoid direct sunlight and high temperature environments. Shuttle looms are best stored indoors or in rooms with sun shelter.

4. Packaging: Before storage, the shuttle loom can be packed with dust cloth or plastic film to avoid the intrusion of dust and moisture. At the same time, the individual parts can be fixed with ropes to prevent damage and loss.

Second, the maintenance of the shuttle loom

1. Regular cleaning: The shuttle loom needs to be cleaned after each use. Remove the shuttle and other parts and wipe the inner and outer surfaces and individual parts of the shuttle with a cleaning cloth. Pay special attention to cleaning the dust and oil stains on the loom body so as not to affect the normal operation of the machine.

2. Lubrication: Regularly lubricate the moving parts of the shuttle loom. Use the right amount of lubricant dripping onto critical components such as chains, gears and bearings. Then run the shuttle loom for a few minutes to distribute the oil evenly.

3. Inspection of parts: Regularly check whether the parts of the shuttle loom, including shuttles, shuttle rods, belts, etc., are worn, loose or damaged. If a problem is found, replace or repair it in time.

4. Anti-rust protection: Shuttle looms are often prone to rust, especially in humid environments. Therefore, for commonly used metal parts, a layer of rust inhibitor can be applied to protect their surface from moisture attack.

5. Tips: When using the shuttle loom, follow the correct operating procedures to avoid excessive use or improper use, so as not to damage the machine. At the same time, you should pay attention to protect your own safety, such as not touching moving parts at will, to avoid accidents.

6. Regular maintenance: There are some key parts of the shuttle loom that need regular repair and replacement. For example, belts, shuttles with severe wear, accessories that have a long service life, etc., all need to be replaced in time to ensure the normal operation of the shuttle loom.

These are some tips and tricks on how to store and maintain the shuttle loom. With proper storage and maintenance, the service life of the shuttle loom can be extended, work efficiency can be improved, and maintenance costs can be reduced. It is hoped that readers can reasonably adopt and use these methods according to their actual situation.