There are precautions for the use of shuttle looms

2023-11-20 06:11:22

Shuttle loom is a kind of machine used to manufacture textiles, which is widely used in the textile industry. When using a shuttle loom, you need to pay attention to the following:

1. Safe operation: When using a shuttle loom, first ensure that the machine is in a stable state and take the necessary safety measures. The operator should wear appropriate work clothes and protective equipment, and should not wear loose clothing, jewelry, etc. At the same time, the operator should be familiar with the various parts of the shuttle loom and its operation methods, and it is strictly forbidden to operate it without training personnel.

2. Equipment maintenance: regularly inspect and maintain the shuttle loom to ensure its normal operation. This includes cleaning machine surfaces and important parts, inspecting and replacing damaged parts, and lubricating machine operating parts. In addition, it is necessary to ensure the stability of the power supply and air supply so as not to affect the normal operation of the shuttle loom.

3. Material selection: Correctly select suitable yarn and fabric materials to ensure product quality. The material should meet the specified quality standards and follow the yarn specifications and spinning batch.

4. Adjust parameters: adjust the appropriate shuttle machine parameters according to different textile requirements. Including yarn tension, weaving width, machine speed, weaving mode, etc. Reasonable parameter settings can improve the quality and speed of textiles.

5. Check the status of the loom: During the operation of the shuttle loom, the status of the loom should be checked frequently to ensure that the equipment works normally. Inspection includes checking the operation of the machine, checking the quality of the weaving, checking the tightness of the weaving, etc. If an anomaly is detected, measures are taken in time to avoid damage to the machine or textiles.

6. Keep it clean at all times: It is very important to keep the shuttle machine clean. Keeping the work area tidy and cleaning yarn residues on the shuttle loom from start to finish can help reduce breakdowns and increase productivity.

7. Regular maintenance: Regularly carry out comprehensive overhaul and maintenance of the shuttle loom to ensure the long-term stable operation of the equipment. This includes removing dust and yarn tangles, replacing worn parts, adjusting the tightness of various parts of the machine, etc. Regular maintenance can extend the service life of the shuttle loom and increase its efficiency.

8. Learning and improvement: Continuous learning and improvement of work skills, understanding the latest shuttle loom technology and technology, and improving your own weaving technology. Through participating in training courses, learning experience exchange, reading relevant literature, etc., they continuously improve their professional knowledge and skills to adapt to the development of the industry.

In short, the use of shuttle looms needs to be carried out in strict accordance with operating procedures and precautions to ensure work safety and production quality. At the same time, regular equipment inspection and maintenance are carried out to keep the machine in good condition. Through continuous learning and improvement, improve their own technical level, improve work efficiency and product quality.